A program is needed in order to make a live USB disk. Head to etcher.io and download the Etcher tool. Extract it from the zip archive, and right click (or highlight with the mouse and press the Enter key) on the extracted file to run it.
In this article we are going to learn step by step process of how to make an Ubuntu bootable USB drive in windows!
- I want to try Ubuntu as after upgrading to windows 10, my laptop runs slow. I have created bootable USB several times but can't make my laptop to boot. I saw tutorials and already setup bios to boot from USB first and also turnoff fast boot from power option. I can however use other USB for windows 10 that i have and that works but not from.
- 3- Boot your Raspberry Pi with the SD-Card (for the moment don't plug the USB disk). If you want to access your Raspberry Pi from ssh, don't forget to add the ‘ssh' file to the boot partition.
Ubuntu is well known and opensource Operating system, it stands next to the Windows OS when it comes user preference. But both the OS have many differences and features that make unique, Ubuntu provides a simple yet fun operating system with a lot of features. It may not be always possible to download your operating system right where you are via online methods. This makes copying it on to your PC quite easy and carrying it around in a handy USB highly portable. Here we have addressed the topic and given you a basic idea on the same.
Steps to Make an Ubuntu Bootable USB
Before you get started with making an Ubuntu Bootable USB drive, you must ensure that you have a really good USB drive which is pre formatted and have more than enough space which will occupy by ISO file image after Writing process is completed. Also it will be great if you use USB 3.0 to get maximum writing speed if you have available but a USB 2.0 will do the work. Just follow the below steps to make Ubuntu Bootable USB:
- The very first step is to download Ubuntu OS, of course which you want to write it in USB drive. you can download it from here. Make sure you met system requirements and the selection of the version which is completely depends on you.
- After downloading Ubuntu ISO file you need to download Win32 Disk Imager which you can download here. and install it on your machine!
- Now you have ISO File ready, Software ready so just insert USB Drive on which you what to write.
- Now we're ready to perform the real action! Open the application (win32 disk imager) better if you run as administration.
- After opening application you will able to see 'image file' just click on it and locate the folder where you have downloaded Ubuntu ISO file. By default it will directly open the download folder and only lookup for ISO file only so you will easily select the file!
- Under device section check if the right USB selected or not also it will ask for format it kindly ignore the massage.
- Go ahead and click 'Write' which is located at the bottom part.
- A pop-up message will appear saying that 'Writing to a physical device can corrupt the device. Are you sure you want to continue?', you can just go ahead and click 'Yes'.
- After the transfer is finished, you have your Ubuntu inside the USB and can install it directly from the small module any time you want.
Some Suggestions
You can have a variety of options when coming to operating the applications for transferring Ubuntu in the USB disk drive. You can always choose one by your research but we have made that step easier by these choices given. Sometimes multiple applications need to be downloaded, but most importantly make sure they are Linux friendly and easy to use. If not you can always search further.
- Clonezilla
- Startup Disk Creator
- Live Linux USB Creator
- Rsync
- win32 disk imager
Along with copying make sure that the version of the operating system is not too old so that you can have the latest versions with added features and it also saves you the extra hassle you have to go through to update the system into the latest version.
Final Verdict
Ubuntu operating system is pretty easy to install. It is rather easy to transfer your Ubuntu ISO file into a USB for usage at a later time also. Make sure to go through all the points correctly and follow them step-by-step so that you operate the functions easily. All queries regarding creating an Ubuntu bootable USB shall be answered in the comments below and feedback on several applications is also welcome at any time.
Introduction: Raspberry Pi 4 Ubuntu USB Boot (No SD Card)
The instructions are below, and will guide you on booting the Raspberry Pi 4 without an SD Card.
If you do not want to follow the steps, there are pre-built images on the original post. Just flash these images to a USB drive, and you are good to go (so long as you have an EEPROM that supporst USB booting -- step 3)
Supplies:
Raspberry Pi 4
USB SSD or Flash Drive
Step 1: Download Ubuntu for Raspberry Pi From Ubuntu Site
Download the Ubuntu image for raspberry pi 4 form the Ubuntu official website. How to make powerpoint presentation with video.
Step 2: Write Image to USB Disk
Flash the image to a USB drive. This can be a USB stick, or a USB SSD. I would recommend using Balena Etcher on Windows and MacOS. If you are using Ubuntu, the built-in Image Writer will work just fine.
Step 3: Update Raspberry Pi EEPROM
For this step, there are several sub-steps. If you have already updated the Raspberry Pi EEPROM to the 'stable' release, then you can skip this step.
First, you must write the RaspberryPiOS image (https://www.raspberrypi.org/downloads/raspberry-pi-os/) to an SD card.
Second, boot the Raspberry Pi, and edit the /etc/default/rpi-eeprom-update file by typing
and change the 'FIRMWARE_RELEASE_STATUS' entry from critical to stable.
Third, run
from the terminal, and allow the update to finish.
See https://www.raspberrypi.org/documentation/hardware/raspberrypi/booteeprom.md for further details if you need them
Step 4: Update Raspberry Pi Firmware
Download the updated firmware files from the raspberry pi github site (https://github.com/raspberrypi/firmware/tree/master/boot).
Copy all *.dat and *.elf files to the Ubuntu boot partition on the USB driver flashed with the Ubuntu image from step 2. (Overwrite the files that were previously there)
Step 5: Decompress the Kernel
The Raspberry Pi 4 bootloader cannot take a compressed kernel image. You must manually decompress this before your first boot.
To do this on linux, open the boot partition of the Ubuntu USB and run
from the terminal.
You can do this on Windows using 7-zip and extracting the vmlinuz file. Just be sure to rename the extracted file to vmlinux.
Step 6: Update the Config.txt File
from the terminal, and allow the update to finish.
See https://www.raspberrypi.org/documentation/hardware/raspberrypi/booteeprom.md for further details if you need them
Step 4: Update Raspberry Pi Firmware
Download the updated firmware files from the raspberry pi github site (https://github.com/raspberrypi/firmware/tree/master/boot).
Copy all *.dat and *.elf files to the Ubuntu boot partition on the USB driver flashed with the Ubuntu image from step 2. (Overwrite the files that were previously there)
Step 5: Decompress the Kernel
The Raspberry Pi 4 bootloader cannot take a compressed kernel image. You must manually decompress this before your first boot.
To do this on linux, open the boot partition of the Ubuntu USB and run
from the terminal.
You can do this on Windows using 7-zip and extracting the vmlinuz file. Just be sure to rename the extracted file to vmlinux.
Step 6: Update the Config.txt File
The config.txt file has the startup options for the various RaspberryPi boards. Update the information for the Raspberry Pi 4. Replace the section for [pi4] with the following:
Step 7: Create Auto-Decompression Script
During an update to Ubuntu or one of its many packages, apt will create a new kernel image. This image will be compressed, and will cause the Raspberry Pi not to boot after the update. In order to fix this, a script needs to be created to decompress the new kernel images after updates.
Create a script called auto_decompress_kernel in the boot partition. This can be done with most text editors. In Linux, I would recommend either nano or Atom, in Windows I would recommend Atom (Note for you Windows users using Text Edit, be sure to remove the 'TXT' file extension. If you do not, this will not work). The script should contain the following code:
Step 8: Create Another Script
In order for the script that we just created to get called every time a package is installed, we need to create another script.
This script needs to be created within the Ubuntu filesystem. If you are doing this setup on a linux system, you can perform this part before your first boot, if you are on Windows or MacOS, you will need to do this after your first boot.
Create this script in the /etc/apt/apt.conf.d/ directory, and name it 999_decompress_rpi_kernel How to play battlegrounds xbox one.
The code should be:
Once this has been created, you will need to make the script executable. This can be done using the following code:
Step 9: Enjoy Ubuntu on the Raspberry Pi 4
Create Ubuntu Boot Usb On Windows
Now you can boot Ubuntu on a USB enabled drive.
Be the First to Share
Recommendations
Make Ubuntu Usb Boot Disk
Pi Day Speed Challenge
Trash to Treasure Contest
Microcontroller Contest
